Manufacturer of many different types of electric motors ranging from 1/8hp to 1000hp. Baldor offers standard efficiency, AC-DC, premium-efficient, ODP, TEFC, and explosion-proof pumps. Baldor offers more in standard T-Frame, JM-JP, C-Face, 56J, and TC frames.

API 547 Large AC Motors

API 547 motors are easy to specify! There is no need to fill out data sheets as API has defined default selections suitable for General Purpose Petroleum and Chemical centrifugal load applications. Data sheets are available for limited options and accessories.

Reliance has pre-engineered model numbers available for 2 Pole and 4 Pole motors. Pre-engineered model numbers offer product consistency and reduced lead times.

The API monogram on a Reliance motor is a visual reinforcement of the quality, reliability, and adherence to the 547 specification that is built in to our product. Users can be confident that this product will meet the application requirements of their Petroleum, Chemical, or other Severe Duty application because the American Petroleum Institute has audited our Large Motor Engineering and Manufacturing facility and found Reliance worthy of applying the API Monogram to our product.

Engineered pump and pump product solutions for your water, wastewater, and commercial pumping requirements offering reliable product knowledge, application expertise, and responsive support.

Franklin Electric offers a full line of well water pumps, submersible pumps, and industrial pumps for submersible and aboveground water systems applications. Typical installations for our water pumps include residential clean water, residential wastewater, light commercial, agricultural, industrial pumps, and municipal systems.

Submersible water pumps (sometimes referred to as "submergible pumps") are water pumps that can operate while fully submerged in water. Mechanical seals keep the water from entering the pump motor and causing a short circuit. Submersible pumps are used for many applications, the main purpose being to pump water from a source, such as a water well, to a desired destination.

Over half a century of excellence in designing and manufacturing internal gear pumps, external gear pumps, and positive displacement pumps for the OEM and process market. Haight Pump prides itself on its outstanding lead time and quality customer service.

For over seventy years, Haight has been providing industry with simple, rugged and dependable internal gear pump manufacturing.

These pumps are built on the proven reliability of the "gear within a gear design", which Haight (gear pump manufacturer) pioneered. This simple concept results in a stronger pump with fewer parts.

This gear design also functions exceptionally well at standard motor speeds in close-coupled mounting arrangements. This eliminates both the need for a gear reducer, and misalignment problems.

Haight's Universal design series offers unparalled flexibility to engineer a "custom" pump from standard components eliminating excessive cost and leadtime.

Internal Gear Pumps

1U-40U (1-40 gpm) Series Round Hub Positive Displacement Pumps

All UniverSeal Shaft Pumps features:

• Reduced maintenance expenses - simple, quick seal changes
• Less production disruption and downtime - perform maintenance in place rather than in the shop
• Reduced maintenance inventory - one pump can be adapted to meet many application requirements
• Provide future adaptability - easily change the pump as your needs change
• Reduced replacement part costs, no special custom design parts
• Interchangeable with existing Haight pumps without modification
• Pumps specified with an integral relief valve can be quickly and easily changed to perform in either suction return, or tank return mode. The relief valve can be readily changed to operate in either clockwise or counterclockwise flow direction
• Pressures from 10 to 250 psi

Ductile Iron Series Square Flange Pumps

120 to 240 gpm and pressures up to 250psi.

Cast Iron Stainless & Bronze Pumps

44U to 80U Pumps Key Features

• "Gear within a Gear" Design for Quiet Operation
• Built in Gear Reduction, Fully Supported, Through-Shaft Design, utilizes Standard Motor Speeds
• UniverSeal built in Shaft Seal Flexibility
• Only Two Moving Parts reduces Maintenance and Wear
• Closed Coupled or Foot Mounted Bracket Designs
• Readily Accepts Magnetic Drive Option
• Inlet/Outlet Ports accept 2″ NPT 150# & 300# Flange Connections
• 250 PSI Discharge Capability
• Non- Metallic Rotor eliminates galling problems, even with thin fluids including water
• Integral Relief Valve with "No Leak" Adjustment, and Tank Return Operation Capability
• 44 to 80 gpm at pressures up to 250 psi

Custom Gear Pumps

E Series - Positive Displacement Pump

The E - Series positive displacement pumps are an economical, high performance modification to our D - Series models. These pumps are particularly well suited for use in direct drive, hub mounted configurations where size, weight, and cost are crucial performance criteria in an application. The rugged simplicity of the E - Series is proven thousands of times every year in high temperature applications through-out the world.

Centrifugal Pumps

HIC+ Series Industrial Stainless Steel Centrifugal Pumps

• Constructed of 316L Stainless Steel
• Glass Beaded Finish
• Standard NPT or Flanged Connections
• Type 21 mechanical seal, with multiple material options
• Includes stainless adapter
• EXCELLENT LEAD TIMES!

Bed Plate Assemblies

10-240 gpm
For use in the following applications:

• Fuel Transfer
• Fuel Filtration
• Liquified refrigerant circulation
• Portable re-fueling system
• Lubricating cooling system
• Agricultural chemical transfer
• Salt water wash down system

Price Pump Company is a premier manufacturer of Centrifugal and Air Operated Diaphragm (AOD™) pumps with over 85 years of experience. We specialize in addressing the needs of specialty applications for industrial and OEM users. Let us develop a pump for you!

Close-Coupled and Frame-Mount Centrifugal Pumps

Magnetically Driven Centrifugal Pumps

MSW Pressed Stainless Steel (Multi-Stage Centrifugal Pumps)

VFD: Variable Frequency Drive

Price® Pump is now offering two new variable frequency drives (VFD) that offer precision control and fast response that exceeds the performance of conventional 'general-purpose' AC inverters. These drives meet the requirements of OEMs, end users, installation companies and panel builders.

Offering multiple modes of motor control; V/Hz, Sensor-Less Vector and Flux Vector, these drives deliver accurate speed and torque control of any standard squirrel cage motor. With a standard 5-year warranty, quality and reliability is essentially guaranteed.

The drives are specifically designed to be easy to install and apply. These products bring a whole new meaning to user-friendliness and coupled with parameter configuration and start-up assistance from Price Pump, the installation, start-up and tuning of these VFD drives could not be easier. They are generally available to ship from stock with a range of available options and parameters configured to your specifications prior to shipment.

So, whether your looking to add precision process control, reduce your energy costs or control starting loads and speeds, a Price® Pump Variable Frequency Drive can provide all three of these benefits in a economical compact package that is supported by world class technical and application support.

Wanner Engineering Hydra-Cell Heavy Duty Pumps have proven their performance and reliability in some of the toughest industrial equipment and process applications. We hope the information presented here can help you determine the best solution for your pumping needs.

Hydra-Cell Design Advantages

• Positive displacement with smooth, low pulse output
• Heavy-duty industrial construction for long service life in harsh conditions
• Hydraulically-balanced, undressed diaphragms
• Wide range of flow rates from 0.1 to 37 gpm (0.4 to 128 l/min) and pressures up to 2500 psi (170 bar)
• Repeatable, accurate output - ideal for metering and dosing
• Sealless design - can pump particles in suspension
• Flexible installation with a variety of mounting configurations
• Minimal maintenance; no cups, packings or seals - can even run dry!
• Wide choice of materials of construction for pump heads, diaphragms and valve assemblies
• High efficiency - low power consumption

D Series Models M03 to D35

• Flows from 1 to 37 gpm at pressures up to 2500 psi
• Pumps offered in cast iron, all bronze, 316 stainless steel, hastealloy, polypropylene, and kyner

T Series Model 100

• RPM: 450
• GPM: 100
• I/Min: 170
• Max Inlet Pressure: 300 psi (20 bar)
• Pressure Variable: to 3000 psi (207 bar)

MTH Pumps is a commercial and industrial pump manufacturer serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, water services, refrigeration, petroleum, as well as many chemical process applications.

Series 140 - 180 Regenerative Turbine Pumps

Regenerative turbine pumps represent the most economical, high performance alternative for low flow (to 55 GPM) applications involving moderate to high pressures (heads to 700 feet). By combining years of regenerative turbine pump designs with precision computer controlled manufacturing, the 140 • 240 • 180 • 280 Series delivers high efficiency pumping operation, even at low NPSH. High quality parts and an easily serviceable design provide low maintenance and long life.

Flexible Coupled Pumps
4 - 55 GPM up to 600 Feet of Head
All Bronze, Bronze Fitted, All Iron, or Cast 316 Stainless Steel Construction Available

Series 150 - 160 - 170 - 250 - 260 - 270 Regenerative Turbine Pumps
Flexible Coupled Pumps
15 - 150 GPM up to 1150 Feet of Head
All Bronze, Bronze Fitted, All Iron, or Cast 316 Stainless Steel Construction Available

Series T31 - T41 - T51 Regenerative Turbine Pumps
Capacities to 40 gpm up to 230 feet of head
Close Coupled or Flexible Coupled Pumps
All Bronze or Cast 316 Stainless Steel Construction Available

Uniqueflo products are the premier alternative source for progressing cavity pumps and parts in North America, manufacturing replacement parts that meet original equipment manufacturers' specifications for most brands of PC pumps.

Other manufacturers claim to provide "will-fit" parts for PC pumps but they cannot compare with the attention to detail and the distinguishing component features that set Uniqueflo apart.

PC Pump Replacement Parts

PC pump stators from Uniqueflo are molded in long lengths, assuring dimensional consistency by reducing the potential for manufacturing process variations. CNC controlled stator end finishing ensures consistency in stator finish and elastomer dressing and the machined conic inlets in the ends of the stators provide fluid flow efficiency to meet low NPSH requirements.

Uniqueflo provides complete refurbishing services including stator relining and rotor replating to return worn pumping elements to like-new condition.

Thermoplastic Pumps for corrosive chemicals, acids, caustics, salts, chlorides, halogens, ultrapure water and other aggressive process and waste fluids.

SUMP-GARD Vertical and Cantilever Centrifugal Pumps

Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid. This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m3/hr), heads to 245 ft. (85 m), and temperatures to 275℉ (135℃).

SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter.

Cantilever pumps have no bearings or bushings below mounting plate. These pumps are ideal for pumping products that have contaminants or solids in them.

Column lengths up to 48 inches.

CHEM-GARD Mag Drive and Horizontal Centrifugal Pumps

These heavy-duty and rugged horizontal centrifugal pumps are designed, engineered and constructed to handle corrosive, abrasive and other aggressive fluids, as well as those liquids which must remain free of metallic contamination. CHEM-GARD® pumps are available in a wide selection of thermoplastics and in ANSI/DIN, self-priming, close-coupled and integral pump/shaft motor designs.

Their unique sliding front bearing design assures minimum shaft overhang, simplifies maintenance, and allows all types of mechanical seals to be utilized. Vanton's unique reverse-mounted seal arrangement avoids metal contact with fluid and eliminates need for exotic metal seals. Rated for flows to 1450 gpm (330 m3/hr), heads to 400 feet (122 meters), and for use at temperatures to 275℉ (135℃).

FLEX-I-LINER

Flex-I-Liner pumps are sealless and self-priming. They can pump in either direction and can run dry. Flex-I-Liner pumps can be furnished with electric motors, with rotary vane air motors or with variable speed drives for metering purposes.

Engineered to handle:

• Corrosive Chemicals
• Abrasive Slurries
• Pharmaceuticals
• Foodstuffs
• Liquids with entrained gases
• Viscous Fluids up to 20% of soft solids
• Ultrapure Chemicals
• Shear Sensitive Liquids

PUMP/TANK

For Collection, Transfer or Treatment of Corrosive Process and Waste Liquids

Standard or customized systems
Stationary or mobile models
Tanks from 60 to 5,000 gallons

Air-operated double diaphragm (AODD) pumps offer a number of advantages that make them perfect for an almost endless variety of uses. AODD pumps:

Elima-Matic Pumps

Versa-Matic® enhances the standard for pumping performance with the next generation in Elima-Matic® technology. As the name suggests, Elima-Matic pumps virtually eliminate pumping problems to keep your operations running smoothly. Elima-Matic pumps are available in a variety of plastic and metal materials, such as polypropylene, acetal, aluminum, and stainless steel. Sizes range from 1/4" to 3" and specialty features are available, including clamped design, bolted design, split manifold, and side discharge.

Flow rates from 0 to 260 gpm and pressures up to 100 psi.

Ultra-Matic Pumps

Get all the benefits of ultra-efficient pumping with Versa-Matic's Ultra-Matic U2 2" pumps. Available in bolted and clamped configurations, these pumps are designed to eliminate costly air leakage and extend in-service life for a lower total cost of ownership. Easy to install and maintain, the pumps feature chemical-resistant materials such as stainless steel, ceramic, polypropylene and PVDF to further reduce repair costs and extend service life.

Specialty Pumps

Versa-Matic's reputation for high quality, high performance pumps goes beyond our AODD product line. From a rugged line of submersible and high pressure pumps to specific solutions for FDA, sanitary, solids handling and mining applications, Versa-Matic Pumps will provide lasting value.

Replacement Parts

For Aro, Wilden, and Yamada.

Vican Pump, manufactures Rotary Gear Positive-Displacement Pumps for a variety of fluid-handling applications.

Pump users, engineers and technicians in the fluid-handling industry will find information and technical data about positive - displacement pumping principles as well as general fluid handling information.

Vican Pump is a registered trademark of Viking Pump of Canada Inc., A Unit of IDEX Corporation.

General Purpose Pumps

Series 32/432 pumps are designed for handling a variety of fluids while directly connected to nominal speed motors. The pump is supplied with a time proven mechanical seal to eliminate leakage. A ball bearing handles thrust loading and is not exposed to liquid pumped. An integral relief valve can be supplied on request.

Heavy Duty Rotary Gear Pumps

These Series 190 pumps are designed to operate at nominal motor speeds. Ball bearings are heavy duty, grease lubricated type, oversized to withstand excessive thrust and radial loads while maintaining perfect shaft and rotor alignment. Pump is supplied with mechanical seal and "O" ring gasketing. The idler bushing is made of self-lubricating carbon material assuring trouble free operation. Integral relief valve is standard.

Special Rotary Gear Pumps

The Series 230 jacketed pumps are specifically designed to handle heavy, viscous liquid requiring temperature control to maintain a following state. Series 230 pumps can be supplied with jacketed casing, head, rotor bearing sleeve and integral relief valve. Packing gland is multi-ring and can be supplied with special packing for high temperature conditions, when required.

Centrifugal Pumps

These Series 540 pumps are designed to operate at temperatures up to 250 deg F or 120 deg C. They have the capacity to 1500 USGPM or 5700 l/min. The impeller is of a non-clogging type with extra heavy vanes. The shaft is of high tensile steel accurately machined to ensure proper fit of impeller and bearings. The casings are vertically split and may rotate every 45 deg from regular top vertical position to facilitate piping.

Walchem and Iwaki joined forces to develop the most innovative and comprehensive metering pump product line in the world. Iwaki metering pumps are designed for a broad range of applications, and are manufactured to the highest quality standards to exceed even the toughest customer expectations. Our commitment to new product development and innovation has resulted in many industry firsts, including the EHF - the world's highest capacity solenoid metering pump, and the EK - the world's first IP67 waterproof solenoid metering pump.

Featuring four great pump series, EZ, EW, EK and EHE, E-Class metering pumps are powered by advanced microprocessor-based electronics and superior mechanical design. With capacities up to 20 GPH (76 l/h) and pressures up to 250 PSI (17 bar) , E-Class has a pump that will fit most any industrial, municipal, or agricultural water or wastewater application. And the entire E-Class pump line is backed with a comprehensive 2-year warranty that covers the entire pump, including the liquid end and diaphragm.

High Speed Performance

E-Class pumps operate at 360 strokes-per-minute. Most competitive products operate at 180 SPM or less resulting in slug feeding, accelerated diaphragm wear and poor feed control.

Dual Bearing Support

All E-Class pumps feature dual bearing support. The armature and shaft are supported with a bearing on each end, which ensures proper axial movement, enabling E-Class pumps to operate at 360 SPM while extending the life of the diaphragm.

Superior Check Valve Performance

Dual Check Valve Assemblies in both suction and discharge fittings feature precision ball guides and tapered seats. Precise machining and molding of parts limit valve ball travel, ensuring that balls fully seat and seal with every stroke. This superior check valve design and performance guarantees fast priming.

High Compression Ratio

The compression ratio of a metering pump is important because it affects the pump's ability to prime and vent. The compression ratio is improved when you reduce the dead volume of the pump head during operation. All E-Class pumps feature a very high compression ratio that ensures proper feed, especially with off-gassing products. (e.g. Sodium Hypochlorite)

Walchem Analytical Controllers

Walchem offers PH, ORP, and conductivity, as well as single and dual controllers.

Multi-Purpose/ General Industrial Controllers

WebMaster Industrial online process controller with 8 relays, up to 4 direct sensor inputs, 8 analog inputs, 12 digital inputs, local/remote communications, data logging and email/text message alarms.

Cooling Tower Controllers

WCT/WDT low cost, reliable control of 1 or 2 cooling towers. Up to 2 direct sensor inputs (conductivity and either pH or ORP) and 6 relays available. Multiple feed modes and dual biocide additions.

Boiler Controllers

WBL/WDB low cost, reliable control of inhibitor and blowdown for 1 or 2 boilers. High temp/ pressure contacting conductivity sensor inputs and up to 6 relays. Multiple feed modes and continuous or intermittent sampling options.

Disinfection Controllers

WDIS will reliably and economically control your water treatment disinfection process. Select from free chlorine, chlorine dioxide, ozone or peracetic acid sensors or configure to use a variety of other disinfection sensors.

pH/ORP Controllers

WPH/WDP Wall Mount economical, reliable process control. Up to 2 direct sensor inputs (pH, ORP or any combination) and 5 relays available.

Electrodeless Conductivity Controllers

WEC Controllers offer economical control of 1 or 2 baths. Non-contacting conductivity sensors are suitable for very harsh chemical control applications up to 1000mS/cm. CPVC and PEEK sensor options, 4 conductivity ranges and up to 6 relays.

No matter what your needs, the Zoeller family of companies has the very best water pump solutions to commercial and municipal solutions engineered to exat standards. Your Peace of mind is our top priority.

Sump, Effluent, Dewatering

Effluent or dewatering submersible pump for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems.

Hazardous Environment

Grinder Pumps

Multi-stage booster pumps, immersible pumps, in-line vertical pumps, end suction centrifugal pumps, dosing pumps and submersible pumps.

Replacement parts for Wilden, Aro, Yamada

Peristaltic pumps

Replacement Pumps/Parts Sulzer-APT, Goulds, Durco Gorman Rupp, Allis-Chaimers, Worthington

Seal-Less Mag Drive Pumps Centrifugals, Drum Pumps